Skip to main content

Bank Safety Analysis

Is First Federal Bank, a FSB Safe?

First Federal Bank, a FSB shows stress on 1 of 5 regulatory safety dimensions and is currently outside well-capitalized thresholds on at least one measure. Analysis based on the Q2 2026 call report.

The largest change between Q1 2026 and Q2 2026 was in return on assets, which fell 0.22 percentage points to 0.66%. Within Alabama, First Federal Bank, a FSB is 25th of 36 on CET1 ratio, 12.44% as of Q2 2026, below the middle of the field. The median for banks in the $100M-1B asset tier is 15.07% on CET1 ratio. First Federal Bank, a FSB sits 2.63 points lower, at 12.44% (Q2 2026). From Q3 2023 to Q2 2026, First Federal Bank, a FSB's CET1 ratio ranged between 11.79% (Q2 2024) and 13.63% (Q3 2023) and its Texas ratio ranged between 6.49% (Q3 2025) and 11.57% (Q3 2024). Compared with Q2 2025, First Federal Bank, a FSB's CET1 ratio from 11.81% to 12.44%, noncurrent loans to total loans from 0.52% to 0.84%, Texas ratio from 8.09% to 8.99%, return on assets from 0.39% to 0.66% in Q2 2026.

Data as of · sourced from FFIEC call reports. How we update

Overall verdict Stress: below at least one supervisory threshold
12-month failure risk score
0.06%
Risk tier
MODERATE
Composite risk score
0.68/100

A relative risk score, not a calibrated probability: it ranks this bank against every other filer. Model AUC 0.988 (v20261005_114304). Trained on credit-driven community-bank failures, it carries little signal for interest-rate or deposit-flight risk, and its accuracy above roughly $10B in assets is not established, so a low score is not evidence of safety. See the methodology. This is not investment advice or a credit rating.

Scorecard by dimension

Peer cohort: banks with $100M to $1B in assets (2,672 banks) · Industry averages as of Q2 2026.

Capital Adequacy PASS
CET1 Ratio: 12.44% · 544 bps above the 7.0% well-capitalized-plus-buffer line
Peer tier avg: 17.09% Industry avg: 14.72%
Pass: ≥ 7.0% (well-capitalized plus buffer) · Fail: < 4.5% (below minimum)

CET1 of 12.44% sits comfortably above the 6.5% well-capitalized threshold under Prompt Corrective Action and the 7.0% level required once the capital conservation buffer is included.

Leverage PASS
Tier 1 Leverage Ratio: 7.82% · 282 bps above the 5.0% well-capitalized line
Peer tier avg: 11.73% Industry avg: 9.01%
Pass: ≥ 5.0% (well-capitalized) · Fail: < 4.0% (below minimum)

Tier 1 leverage of 7.82% is above the 5% well-capitalized threshold.

Asset Quality PASS
Nonperforming Loans (NPL) Ratio: 0.84% · 66 bps below the 1.5% supervisory watch band
Peer tier avg: 0.94% Industry avg: 1.02%
Pass: < 1.5% · Fail: > 3.0%

Nonperforming loans at 0.84% are within industry-normal range.

Stress Buffer PASS
Texas Ratio: 8.99% · 4,101 bps below the 50% supervisory watch band
Peer tier avg: 7.40% Industry avg: 7.23%
Pass: < 50% · Fail: > 100% (historical failure threshold)

Texas Ratio of 9.0% is well below the 100% historical failure threshold.

Operating Efficiency FAIL
Efficiency Ratio: 92.93% · 1,793 bps above the 75% supervisory concern band
Peer tier avg: 61.22% Industry avg: 56.25%
Pass: < 65% (lower is better) · Fail: > 75%

Efficiency ratio of 92.9% suggests significant cost-to-revenue challenges.

Risk screens

Latest filing (Q2 2026), passing screens included.

Risk screens for First Federal Bank, a FSB
Screen Value Trigger Result
CET1 capital ratio supervisory threshold 12.44% Flags below 7% Within range
Texas ratio BankRegReports band 8.99% Watch at 50%, concern at 100% Within range
Non-performing loan ratio BankRegReports band 0.84% Flags at 3% or above Within range
Uninsured deposit share BankRegReports band — Watch at 50%, concern at 70% Not reported
Loan-to-deposit ratio BankRegReports band 126.18% Flags at 100% or above Flagged
Commercial real estate to capital supervisory threshold 24.96% Watch at 200%, concern at 300% Within range
Held-to-maturity unrealized loss to equity BankRegReports band 0.44% Watch at 10%, concern at 25% Within range

Capital ratio: last 12 quarters

CET1 (%)
Quarter CET1 (%)
Q2 2026 12.44%
Q1 2026 12.52%
Q4 2025 12.45%
Q3 2025 12.40%
Q2 2025 11.81%
Q1 2025 12.11%
Q4 2024 12.72%
Q3 2024 11.82%
Q2 2024 11.79%
Q1 2024 13.06%
Q4 2023 12.37%
Q3 2023 13.63%

Texas Ratio: last 12 quarters

Texas Ratio (%)
Quarter Texas Ratio (%)
Q2 2026 8.99%
Q1 2026 9.67%
Q4 2025 6.92%
Q3 2025 6.49%
Q2 2025 8.09%
Q1 2025 9.37%
Q4 2024 9.54%
Q3 2024 11.57%
Q2 2024 11.39%
Q1 2024 8.78%
Q4 2023 7.65%
Q3 2023 7.48%

First Federal Bank, a FSB by quarter

Key safety ratios, last 12 quarters
Quarter end CET1 Noncurrent loans Texas ratio ROA
Jun 30, 2026 12.44% 0.84% 8.99% 0.66%
Mar 31, 2026 12.52% 0.82% 9.67% 0.88%
Dec 31, 2025 12.45% 0.66% 6.92% -0.42%
Sep 30, 2025 12.40% 0.66% 6.49% 0.98%
Jun 30, 2025 11.81% 0.52% 8.09% 0.39%
Mar 31, 2025 12.11% 0.59% 9.37% 0.02%
Dec 31, 2024 12.72% 0.63% 9.54% -1.16%
Sep 30, 2024 11.82% 0.87% 11.57% -0.36%
Jun 30, 2024 11.79% 0.75% 11.39% -0.10%
Mar 31, 2024 13.06% 0.60% 8.78% -0.07%
Dec 31, 2023 12.37% 0.51% 7.65% -2.90%
Sep 30, 2023 13.63% 0.56% 7.48% -1.51%

Banks with a similar risk profile

4 banks in the same asset tier with the same overall verdict.

Frequently asked

Is First Federal Bank, a FSB FDIC insured?

Yes. First Federal Bank, a FSB is an FDIC-insured commercial bank (FDIC Certificate #31127). Customer deposits are protected up to the standard FDIC insurance limit of $250,000 per depositor, per ownership category.

Is First Federal Bank, a FSB well capitalized?

Yes. First Federal Bank, a FSB reports a CET1 Ratio of 12.44%, comfortably above the regulatory well-capitalized threshold that its primary federal regulator, the OCC, applies under Prompt Corrective Action.

What is First Federal Bank, a FSB's nonperforming loan ratio?

As of the most recent call report, First Federal Bank, a FSB's nonperforming loan ratio is 0.84%. Nonperforming loans at 0.84% are within industry-normal range.

What is First Federal Bank, a FSB's Texas Ratio?

First Federal Bank, a FSB's Texas Ratio is 8.99%. It compares nonperforming assets with tangible equity plus reserves; above 100% has historically signaled elevated failure risk.

How safe is my money at any FDIC-insured bank?

FDIC insurance covers up to $250,000 per depositor, per insured bank, per ownership category. If an insured bank fails, the FDIC typically pays insured depositors within one business day.

Add this badge to your website

Free to use. The badge always shows First Federal Bank, a FSB’s most recent filed regulatory figures. It updates automatically each quarter, so it never goes stale.

First Federal Bank, a FSB: regulatory capital profile · BankRegReports

Methodology & disclaimer

Based on the latest FFIEC call report. Model output is an estimate, not a credit rating, and this page is not investment advice. FDIC insurance covers deposits up to $250,000 per depositor per ownership category at any FDIC-insured bank, whatever its safety profile. See the methodology and full profile.