Skip to main content

Bank Safety Analysis

Is Washington State Bank Safe?

BankRegReports is independent of Washington State Bank and never asks for online banking logins or passwords.

Washington State Bank passes all 5 safety dimensions, with capital, asset quality, and stress buffers above the concern bands. Analysis based on the Q2 2026 call report.

The largest change between Q1 2026 and Q2 2026 was in nonperforming loan ratio (nonaccrual plus 90+ days past due), which rose 0.16 percentage points to 0.49%. Among 114 Iowa banks, Washington State Bank sits 11th from the top on CET1 ratio, 20.40% as of Q2 2026. Washington State Bank reported 20.40% on CET1 ratio for Q2 2026, 5.32 points above the 15.08% median for banks in the $100M-1B asset tier. From Q3 2023 to Q2 2026, Washington State Bank's CET1 ratio ranged between 19.41% (Q4 2023) and 20.40% (Q2 2026) and its Texas ratio ranged between 1.55% (Q2 2024) and 10.45% (Q2 2025). Between Q2 2025 and Q2 2026, Washington State Bank's CET1 ratio rose from 20.23% to 20.40%, nonperforming loan ratio (nonaccrual plus 90+ days past due) fell from 1.27% to 0.49%, Texas ratio fell from 10.45% to 5.14% and return on assets fell from 1.39% to 1.32%.

Data as of · sourced from FFIEC call reports. How we update

Overall verdict Pass: well above regulatory thresholds
12-month failure risk score
0.04/100
Risk tier
LOW
Composite risk score
0.47/100

An exploratory screening score that ranks relative failure risk across filers. It is not a calibrated probability, not a credit rating, and not a CAMELS rating. Held-out test AUC 0.904 for the 1-year horizon (v20261005_114304). Trained on credit-driven community-bank failures, it carries little signal for interest-rate or deposit-flight risk. The score covers every FDIC-insured bank in the latest run, but the model was trained on community and regional banks and its accuracy above roughly $10 billion in assets is not established, so a low score is not evidence of safety. See the model evidence and limits and the methodology. This is not investment advice or a credit rating.

Scorecard by dimension

Peer cohort: banks with $100M to $1B in assets (2,757 banks) · Industry averages as of Q2 2026.

Capital Adequacy PASS
CET1 Ratio: 20.40% · 1,340 bps above the 7.0% well-capitalized-plus-buffer line
Peer tier avg: 17.18% Industry avg: 13.74%
Pass: ≥ 7.0% (well-capitalized plus buffer) · Fail: < 4.5% (below minimum)

CET1 of 20.40% sits comfortably above the 6.5% well-capitalized threshold under Prompt Corrective Action and the 7.0% level required once the capital conservation buffer is included.

Leverage PASS
Tier 1 Leverage Ratio: 12.48% · 748 bps above the 5.0% well-capitalized line
Peer tier avg: 11.75% Industry avg: 9.01%
Pass: ≥ 5.0% (well-capitalized) · Fail: < 4.0% (below minimum)

Tier 1 leverage of 12.48% is above the 5% well-capitalized threshold.

Asset Quality PASS
Nonperforming Loans (NPL) Ratio: 0.49% · 101 bps below the 1.5% BankRegReports watch band
Peer tier avg: 0.88% Industry avg: 0.93%
Pass: < 1.5% · Fail: > 3.0%

Nonperforming loans at 0.49% are within industry-normal range.

Stress Buffer PASS
Texas Ratio: 5.14% · 4,486 bps below the 50% BankRegReports watch band
Peer tier avg: 5.96% Industry avg: 5.84%
Pass: < 50% · Fail: > 100% (historical failure threshold)

Texas Ratio of 5.1% is well below the 100% historical failure threshold.

Operating Efficiency PASS
Efficiency Ratio: 43.16% · 3,184 bps below the 75% BankRegReports watch band
Peer tier avg: 63.71% Industry avg: 56.25%
Pass: ≤ 75% (lower is better) · Fail: ≥ 90%

Efficiency ratio of 43.2% reflects competitive operating costs (lower is better).

Risk screens

Latest filing (Q2 2026), passing screens included.

Risk screens for Washington State Bank
Screen Value Trigger Result
CET1 capital ratio supervisory threshold 20.40% Flags below 7% Within range
Texas ratio BankRegReports band 5.14% Watch at 50%, concern at 100% Within range
Non-performing loan ratio BankRegReports band 0.49% Flags at 3% or above Within range
Uninsured deposit share BankRegReports band — Watch at 50%, concern at 70% Not reported
Loan-to-deposit ratio BankRegReports band 71.60% Flags at 100% or above Within range
Commercial real estate to capital supervisory threshold 61.19% Watch at 200%, concern at 300% Within range
Held-to-maturity unrealized loss to equity BankRegReports band 0.00% Watch at 10%, concern at 25% Within range

Capital ratio: last 12 quarters

CET1 (%)
Quarter CET1 (%)
Q2 2026 20.40%
Q1 2026 20.04%
Q4 2025 20.24%
Q3 2025 20.36%
Q2 2025 20.23%
Q1 2025 19.73%
Q4 2024 19.43%
Q3 2024 20.28%
Q2 2024 19.97%
Q1 2024 19.51%
Q4 2023 19.41%
Q3 2023 19.66%

Texas Ratio: last 12 quarters

Texas Ratio (%)
Quarter Texas Ratio (%)
Q2 2026 5.14%
Q1 2026 4.82%
Q4 2025 5.34%
Q3 2025 7.68%
Q2 2025 10.45%
Q1 2025 7.61%
Q4 2024 8.12%
Q3 2024 5.50%
Q2 2024 1.55%
Q1 2024 1.72%
Q4 2023 2.05%
Q3 2023 3.49%

Washington State Bank by quarter

Key safety ratios, last 12 quarters
Quarter end CET1 NPL ratio Texas ratio ROA
Jun 30, 2026 20.40% 0.49% 5.14% 1.32%
Mar 31, 2026 20.04% 0.33% 4.82% 1.33%
Dec 31, 2025 20.24% 0.48% 5.34% 1.21%
Sep 30, 2025 20.36% 1.04% 7.68% 1.22%
Jun 30, 2025 20.23% 1.27% 10.45% 1.39%
Mar 31, 2025 19.73% 1.01% 7.61% 1.31%
Dec 31, 2024 19.43% 1.13% 8.12% 0.90%
Sep 30, 2024 20.28% 0.98% 5.50% 1.17%
Jun 30, 2024 19.97% 0.27% 1.55% 1.41%
Mar 31, 2024 19.51% 0.30% 1.72% 1.48%
Dec 31, 2023 19.41% 0.34% 2.05% 1.29%
Sep 30, 2023 19.66% 0.52% 3.49% 1.38%

Banks with a similar risk profile

4 banks in the same asset tier with the same overall verdict.

Frequently asked

Is Washington State Bank FDIC insured?

Yes. Washington State Bank is an FDIC-insured commercial bank (FDIC Certificate #214). Customer deposits are protected up to the standard FDIC insurance limit of $250,000 per depositor, per ownership category.

Is Washington State Bank well capitalized?

Yes. Washington State Bank reports a CET1 Ratio of 20.40%, comfortably above the regulatory well-capitalized threshold that its primary federal regulator, the Federal Reserve, applies under Prompt Corrective Action.

What is Washington State Bank's nonperforming loan ratio?

As of the most recent call report, Washington State Bank's nonperforming loan ratio is 0.49%. Nonperforming loans at 0.49% are within industry-normal range.

What is Washington State Bank's Texas Ratio?

Washington State Bank's Texas Ratio is 5.14%. It compares nonperforming assets with tangible equity plus reserves; above 100% has historically signaled elevated failure risk.

How safe is my money at any FDIC-insured bank?

FDIC insurance covers up to $250,000 per depositor, per insured bank, per ownership category. If an insured bank fails, the FDIC typically pays insured depositors within one business day.

Add this badge to your website

Free to use. The badge always shows Washington State Bank’s most recent filed regulatory figures. It updates automatically each quarter, so it never goes stale.

Washington State Bank: regulatory capital profile · BankRegReports

Methodology & disclaimer

Based on the latest FFIEC call report. Model output is an estimate, not a credit rating, and this page is not investment advice. FDIC insurance covers deposits up to $250,000 per depositor per ownership category at any FDIC-insured bank, whatever its safety profile. See the methodology and full profile.