Skip to main content

Bank Safety Analysis

Is Wellington State Bank Safe?

Wellington State Bank shows stress on 1 of 5 regulatory safety dimensions and is currently outside well-capitalized thresholds on at least one measure. Analysis based on the Q2 2026 call report.

Noncurrent loans to total loans dropped 1.30 percentage points in Q2 2026, from 6.57% to 5.27%. It was the largest change from Q1 2026 among the key lines here. Wellington State Bank ranks 98th of 184 Texas banks on CET1 ratio, in the lower half at 16.54% (Q2 2026). The median for banks in the $100M-1B asset tier is 15.07% on CET1 ratio. Wellington State Bank sits 1.47 points higher, at 16.54% (Q2 2026). From Q3 2023 to Q2 2026, Wellington State Bank's CET1 ratio ranged between 12.63% (Q2 2024) and 16.54% (Q2 2026) and its Texas ratio ranged between 4.54% (Q4 2024) and 47.38% (Q4 2025). Compared with Q2 2025, Wellington State Bank's CET1 ratio from 14.98% to 16.54%, noncurrent loans to total loans from 2.55% to 5.27%, Texas ratio from 39.35% to 35.39%, return on assets from 0.96% to 1.33% in Q2 2026.

Data as of · sourced from FFIEC call reports. How we update

Overall verdict Stress: below at least one supervisory threshold
12-month failure risk score
0.04%
Risk tier
LOW
Composite risk score
0.27/100

A relative risk score, not a calibrated probability: it ranks this bank against every other filer. Model AUC 0.988 (v20261005_114304). Trained on credit-driven community-bank failures, it carries little signal for interest-rate or deposit-flight risk, and its accuracy above roughly $10B in assets is not established, so a low score is not evidence of safety. See the methodology. This is not investment advice or a credit rating.

Scorecard by dimension

Peer cohort: banks with $100M to $1B in assets (2,672 banks) · Industry averages as of Q2 2026.

Capital Adequacy PASS
CET1 Ratio: 16.54% · 954 bps above the 7.0% well-capitalized-plus-buffer line
Peer tier avg: 17.09% Industry avg: 14.72%
Pass: ≥ 7.0% (well-capitalized plus buffer) · Fail: < 4.5% (below minimum)

CET1 of 16.54% sits comfortably above the 6.5% well-capitalized threshold under Prompt Corrective Action and the 7.0% level required once the capital conservation buffer is included.

Leverage PASS
Tier 1 Leverage Ratio: 9.55% · 455 bps above the 5.0% well-capitalized line
Peer tier avg: 11.73% Industry avg: 9.01%
Pass: ≥ 5.0% (well-capitalized) · Fail: < 4.0% (below minimum)

Tier 1 leverage of 9.55% is above the 5% well-capitalized threshold.

Asset Quality FAIL
Nonperforming Loans (NPL) Ratio: 5.27% · 227 bps above the 3.0% supervisory concern band
Peer tier avg: 0.94% Industry avg: 1.02%
Pass: < 1.5% · Fail: > 3.0%

Nonperforming loans at 5.27% are at a stress-band level above 3%.

Stress Buffer PASS
Texas Ratio: 35.39% · 1,461 bps below the 50% supervisory watch band
Peer tier avg: 7.40% Industry avg: 7.23%
Pass: < 50% · Fail: > 100% (historical failure threshold)

Texas Ratio of 35.4% is well below the 100% historical failure threshold.

Operating Efficiency PASS
Efficiency Ratio: 63.02% · 1,198 bps below the 75% supervisory concern band
Peer tier avg: 61.22% Industry avg: 56.25%
Pass: < 65% (lower is better) · Fail: > 75%

Efficiency ratio of 63.0% reflects competitive operating costs (lower is better).

Risk screens

Latest filing (Q2 2026), passing screens included.

Risk screens for Wellington State Bank
Screen Value Trigger Result
CET1 capital ratio supervisory threshold 16.54% Flags below 7% Within range
Texas ratio BankRegReports band 35.39% Watch at 50%, concern at 100% Within range
Non-performing loan ratio BankRegReports band 5.27% Flags at 3% or above Flagged
Uninsured deposit share BankRegReports band — Watch at 50%, concern at 70% Not reported
Loan-to-deposit ratio BankRegReports band 57.31% Flags at 100% or above Within range
Commercial real estate to capital supervisory threshold 225.23% Watch at 200%, concern at 300% Flagged
Held-to-maturity unrealized loss to equity BankRegReports band 0.00% Watch at 10%, concern at 25% Within range

Capital ratio: last 12 quarters

CET1 (%)
Quarter CET1 (%)
Q2 2026 16.54%
Q1 2026 15.91%
Q4 2025 15.55%
Q3 2025 14.61%
Q2 2025 14.98%
Q1 2025 14.74%
Q4 2024 14.04%
Q3 2024 13.84%
Q2 2024 12.63%
Q1 2024 13.00%
Q4 2023 12.85%
Q3 2023 13.12%

Texas Ratio: last 12 quarters

Texas Ratio (%)
Quarter Texas Ratio (%)
Q2 2026 35.39%
Q1 2026 42.62%
Q4 2025 47.38%
Q3 2025 40.52%
Q2 2025 39.35%
Q1 2025 37.42%
Q4 2024 4.54%
Q3 2024 16.30%
Q2 2024 32.92%
Q1 2024 17.62%
Q4 2023 20.99%
Q3 2023 26.35%

Wellington State Bank by quarter

Key safety ratios, last 12 quarters
Quarter end CET1 Noncurrent loans Texas ratio ROA
Jun 30, 2026 16.54% 5.27% 35.39% 1.33%
Mar 31, 2026 15.91% 6.57% 42.62% 1.19%
Dec 31, 2025 15.55% 7.17% 47.38% 0.90%
Sep 30, 2025 14.61% 6.07% 40.52% 0.66%
Jun 30, 2025 14.98% 2.55% 39.35% 0.96%
Mar 31, 2025 14.74% 2.71% 37.42% 0.91%
Dec 31, 2024 14.04% 0.18% 4.54% 1.22%
Sep 30, 2024 13.84% 0.21% 16.30% 0.72%
Jun 30, 2024 12.63% 1.88% 32.92% 0.52%
Mar 31, 2024 13.00% 1.92% 17.62% 0.36%
Dec 31, 2023 12.85% 1.89% 20.99% 0.32%
Sep 30, 2023 13.12% 1.89% 26.35% 0.19%

Banks with a similar risk profile

4 banks in the same asset tier with the same overall verdict.

Frequently asked

Is Wellington State Bank FDIC insured?

Yes. Wellington State Bank is an FDIC-insured commercial bank (FDIC Certificate #1219). Customer deposits are protected up to the standard FDIC insurance limit of $250,000 per depositor, per ownership category.

Is Wellington State Bank well capitalized?

Yes. Wellington State Bank reports a CET1 Ratio of 16.54%, comfortably above the regulatory well-capitalized threshold that its primary federal regulator, the Federal Reserve, applies under Prompt Corrective Action.

What is Wellington State Bank's nonperforming loan ratio?

As of the most recent call report, Wellington State Bank's nonperforming loan ratio is 5.27%. Nonperforming loans at 5.27% are at a stress-band level above 3%.

What is Wellington State Bank's Texas Ratio?

Wellington State Bank's Texas Ratio is 35.39%. It compares nonperforming assets with tangible equity plus reserves; above 100% has historically signaled elevated failure risk.

How safe is my money at any FDIC-insured bank?

FDIC insurance covers up to $250,000 per depositor, per insured bank, per ownership category. If an insured bank fails, the FDIC typically pays insured depositors within one business day.

Add this badge to your website

Free to use. The badge always shows Wellington State Bank’s most recent filed regulatory figures. It updates automatically each quarter, so it never goes stale.

Wellington State Bank: regulatory capital profile · BankRegReports

Methodology & disclaimer

Based on the latest FFIEC call report. Model output is an estimate, not a credit rating, and this page is not investment advice. FDIC insurance covers deposits up to $250,000 per depositor per ownership category at any FDIC-insured bank, whatever its safety profile. See the methodology and full profile.