Skip to main content

Bank Safety Analysis

Is First Federal Community Bank, SSB Safe?

First Federal Community Bank, SSB passes all 5 regulatory safety dimensions, with capital, asset quality, and stress buffers above supervisory concern bands. Analysis based on the Q2 2026 call report.

Return on assets rose 0.34 percentage points from Q1 2026 to Q2 2026, ending at 1.20% against 0.85%. It was the largest change among the key lines on this page. First Federal Community Bank, SSB ranks 90th of 346 Texas banks on leverage ratio, in the upper half at 13.10% (Q2 2026). The median for banks in the $100M-1B asset tier is 10.93% on leverage ratio. First Federal Community Bank, SSB sits 2.17 points higher, at 13.10% (Q2 2026). From Q3 2023 to Q2 2026, First Federal Community Bank, SSB's CET1 ratio ranged between 16.22% (Q4 2023) and 19.02% (Q1 2026) and its Texas ratio ranged between 1.77% (Q1 2024) and 9.33% (Q1 2026). Compared with Q2 2025, First Federal Community Bank, SSB's noncurrent loans to total loans from 0.56% to 0.76%, Texas ratio from 8.85% to 5.30%, return on assets from 1.04% to 1.20% in Q2 2026.

Data as of · sourced from FFIEC call reports. How we update

Overall verdict Pass: well above regulatory thresholds
12-month failure risk score
<0.01%
Risk tier
LOW
Composite risk score
0.13/100

A relative risk score, not a calibrated probability: it ranks this bank against every other filer. Model AUC 0.988 (v20261005_114304). Trained on credit-driven community-bank failures, it carries little signal for interest-rate or deposit-flight risk, and its accuracy above roughly $10B in assets is not established, so a low score is not evidence of safety. See the methodology. This is not investment advice or a credit rating.

Scorecard by dimension

Peer cohort: banks with $100M to $1B in assets (2,603 banks) · Industry averages as of Q2 2026.

Capital Adequacy PASS
Community Bank Leverage Ratio: 13.10% · 610 bps above the 7.0% well-capitalized-plus-buffer line
Peer tier avg: 17.08% Industry avg: 14.72%
Pass: ≥ 9.0% (CBLR elected) · Fail: < 8.0%

Leverage ratio of 13.10% exceeds the 9% Community Bank Leverage Ratio threshold. The bank is deemed well-capitalized under CBLR.

Leverage PASS
Tier 1 Leverage Ratio: 13.10% · 810 bps above the 5.0% well-capitalized line
Peer tier avg: 11.73% Industry avg: 9.01%
Pass: ≥ 5.0% (well-capitalized) · Fail: < 4.0% (below minimum)

Tier 1 leverage of 13.10% is above the 5% well-capitalized threshold.

Asset Quality PASS
Nonperforming Loans (NPL) Ratio: 0.76% · 74 bps below the 1.5% supervisory watch band
Peer tier avg: 0.93% Industry avg: 1.02%
Pass: < 1.5% · Fail: > 3.0%

Nonperforming loans at 0.76% are within industry-normal range.

Stress Buffer PASS
Texas Ratio: 5.30% · 4,470 bps below the 50% supervisory watch band
Peer tier avg: 7.37% Industry avg: 7.23%
Pass: < 50% · Fail: > 100% (historical failure threshold)

Texas Ratio of 5.3% is well below the 100% historical failure threshold.

Operating Efficiency PASS
Efficiency Ratio: 64.65% · 1,035 bps below the 75% supervisory concern band
Peer tier avg: 61.29% Industry avg: 56.25%
Pass: < 65% (lower is better) · Fail: > 75%

Efficiency ratio of 64.6% reflects competitive operating costs (lower is better).

Note: This bank has elected the Community Bank Leverage Ratio framework, a simplified capital regime for community banks meeting size and complexity criteria. Banks under CBLR don't report CET1 separately; the CBLR leverage threshold serves as the well-capitalized benchmark.

Risk screens

Latest filing (Q2 2026), passing screens included.

Risk screens for First Federal Community Bank, SSB
Screen Value Trigger Result
CET1 capital ratio supervisory threshold — Flags below 7% Not reported
Texas ratio BankRegReports band 5.30% Watch at 50%, concern at 100% Within range
Non-performing loan ratio BankRegReports band 0.76% Flags at 3% or above Within range
Uninsured deposit share BankRegReports band — Watch at 50%, concern at 70% Not reported
Loan-to-deposit ratio BankRegReports band 91.02% Flags at 100% or above Within range
Commercial real estate to capital supervisory threshold 79.39% Watch at 200%, concern at 300% Within range
Held-to-maturity unrealized loss to equity BankRegReports band 0.00% Watch at 10%, concern at 25% Within range

Capital ratio: last 11 quarters

CET1 (%)
Quarter CET1 (%)
Q1 2026 19.02%
Q4 2025 17.99%
Q3 2025 17.68%
Q2 2025 17.38%
Q1 2025 17.26%
Q4 2024 17.12%
Q3 2024 17.31%
Q2 2024 16.80%
Q1 2024 16.41%
Q4 2023 16.22%
Q3 2023 16.25%

Texas Ratio: last 12 quarters

Texas Ratio (%)
Quarter Texas Ratio (%)
Q2 2026 5.30%
Q1 2026 9.33%
Q4 2025 4.36%
Q3 2025 3.91%
Q2 2025 8.85%
Q1 2025 2.95%
Q4 2024 3.17%
Q3 2024 2.07%
Q2 2024 8.29%
Q1 2024 1.77%
Q4 2023 1.89%
Q3 2023 2.02%

First Federal Community Bank, SSB by quarter

Key safety ratios, last 12 quarters
Quarter end CET1 Noncurrent loans Texas ratio ROA
Jun 30, 2026 — 0.76% 5.30% 1.20%
Mar 31, 2026 19.02% 0.69% 9.33% 0.85%
Dec 31, 2025 17.99% 0.59% 4.36% 1.00%
Sep 30, 2025 17.68% 0.54% 3.91% 1.11%
Jun 30, 2025 17.38% 0.56% 8.85% 1.04%
Mar 31, 2025 17.26% 0.33% 2.95% 0.83%
Dec 31, 2024 17.12% 0.29% 3.17% 0.83%
Sep 30, 2024 17.31% 0.31% 2.07% 0.92%
Jun 30, 2024 16.80% 0.33% 8.29% 0.86%
Mar 31, 2024 16.41% 0.26% 1.77% 0.76%
Dec 31, 2023 16.22% 0.28% 1.89% 0.50%
Sep 30, 2023 16.25% 0.30% 2.02% 0.84%

Banks with a similar risk profile

4 banks in the same asset tier with the same overall verdict.

Frequently asked

Is First Federal Community Bank, SSB FDIC insured?

Yes. First Federal Community Bank, SSB is an FDIC-insured commercial bank (FDIC Certificate #27678). Customer deposits are protected up to the standard FDIC insurance limit of $250,000 per depositor, per ownership category.

Is First Federal Community Bank, SSB well capitalized?

Yes. First Federal Community Bank, SSB reports a Community Bank Leverage Ratio of 13.10%, comfortably above the regulatory well-capitalized threshold that its primary federal regulator, the FDIC, applies under Prompt Corrective Action.

What is First Federal Community Bank, SSB's nonperforming loan ratio?

As of the most recent call report, First Federal Community Bank, SSB's nonperforming loan ratio is 0.76%. Nonperforming loans at 0.76% are within industry-normal range.

What is First Federal Community Bank, SSB's Texas Ratio?

First Federal Community Bank, SSB's Texas Ratio is 5.30%. It compares nonperforming assets with tangible equity plus reserves; above 100% has historically signaled elevated failure risk.

How safe is my money at any FDIC-insured bank?

FDIC insurance covers up to $250,000 per depositor, per insured bank, per ownership category. If an insured bank fails, the FDIC typically pays insured depositors within one business day.

Add this badge to your website

Free to use. The badge always shows First Federal Community Bank, SSB’s most recent filed regulatory figures. It updates automatically each quarter, so it never goes stale.

First Federal Community Bank, SSB: regulatory capital profile · BankRegReports

Methodology & disclaimer

Based on the latest FFIEC call report. Model output is an estimate, not a credit rating, and this page is not investment advice. FDIC insurance covers deposits up to $250,000 per depositor per ownership category at any FDIC-insured bank, whatever its safety profile. See the methodology and full profile.