Skip to main content

Bank Safety Analysis

Is Maxwell State Bank Safe? Maxwell, Iowa

Based on its Q2 2026 call report, Maxwell State Bank meets every capital ratio test for well capitalized, its Texas ratio is 3.66%, and its deposits are FDIC insured up to $250,000 per depositor.

BankRegReports is independent of Maxwell State Bank and never asks for online banking logins or passwords.

Short answer

On its Q2 2026 call report, Maxwell State Bank's CET1 ratio is 22.06%, above the 6.5% well-capitalized threshold.

  • CET1 ratio (Q2 2026): 22.06%
  • Tier 1 leverage ratio (Q2 2026): 15.45%
  • Texas ratio (Q2 2026): 3.66%
  • Noncurrent loans ratio (Q2 2026): 1.03%

Maxwell State Bank is an FDIC-insured commercial bank (FDIC Certificate #15930). FDIC insurance covers $250,000 per depositor, per insured bank, per ownership category.

Context: largest US bank failures · what these ratios mean · how we score.

Maxwell State Bank is outside the pass range on 1 of 5 safety dimensions: operating efficiency. Capital and leverage are above their regulatory minimums. The failed band is a BankRegReports band, not a supervisory threshold. Analysis based on the Q2 2026 call report.

Return on assets dropped 3.33 percentage points in Q2 2026, from -3.21% to -6.54%. It was the largest change from Q1 2026 among the key lines here. Among 114 Iowa banks, Maxwell State Bank sits 10th from the top on CET1 ratio, 22.06% as of Q2 2026. The median for banks in the < $100M asset tier is 19.96% on CET1 ratio. Maxwell State Bank sits 2.09 points higher, at 22.06% (Q2 2026). From Q3 2023 to Q2 2026, Maxwell State Bank's CET1 ratio ranged between 10.84% (Q2 2024) and 25.66% (Q3 2025) and its Texas ratio ranged between 0.00% (Q3 2025) and 5.07% (Q1 2026). Between Q2 2025 and Q2 2026, Maxwell State Bank's CET1 ratio rose from 18.16% to 22.06%, nonperforming loan ratio (nonaccrual plus 90+ days past due) rose from 0.53% to 1.03%, Texas ratio rose from 1.46% to 3.66% and return on assets fell from -0.84% to -6.54%.

Data as of · sourced from FFIEC call reports. How we update

Overall verdict Outside a BankRegReports band on operating efficiency
Risk tier
MODERATE
Composite risk score
0.83/100

An exploratory screening score that ranks relative failure risk across filers. It is not a calibrated probability, not a credit rating, and not a CAMELS rating. Held-out test AUC 0.910 for the 1-year horizon (v20261026_025757). Trained on credit-driven community-bank failures, it carries little signal for interest-rate or deposit-flight risk. The score covers every FDIC-insured bank in the latest run, but the model was trained on community and regional banks and its accuracy above roughly $10 billion in assets is not established, so a low score is not evidence of safety. The risk tier comes from the composite score; the 12-month figure rounds to zero for this bank, so it is not shown beside a tier above Low. See the methodology. This is not investment advice or a credit rating.

Scorecard by dimension

Peer cohort: Under $100M (578 banks) · Industry averages as of Q2 2026.

Capital Adequacy PASS
CET1 Ratio: 22.06% · 1,506 bps above the 7.0% well-capitalized-plus-buffer line
Peer tier avg: 25.12% Industry avg: 13.74%
Pass: ≥ 7.0% (well-capitalized plus buffer) · Fail: < 4.5% (below minimum)

CET1 of 22.06% sits comfortably above the 6.5% well-capitalized threshold under Prompt Corrective Action and the 7.0% level required once the capital conservation buffer is included.

Leverage PASS
Tier 1 Leverage Ratio: 15.45% · 1,045 bps above the 5.0% well-capitalized line
Peer tier avg: 14.13% Industry avg: 9.01%
Pass: ≥ 5.0% (well-capitalized) · Fail: < 4.0% (below minimum)

Tier 1 leverage of 15.45% is above the 5% well-capitalized threshold.

Asset Quality PASS
Nonperforming Loans (NPL) Ratio: 1.03% · 47 bps below the 1.5% BankRegReports watch band
Peer tier avg: 1.23% Industry avg: 0.93%
Pass: < 1.5% · Fail: > 3.0%

Nonperforming loans at 1.03% are within industry-normal range.

Stress Buffer PASS
Texas Ratio: 3.66% · 4,634 bps below the 50% BankRegReports watch band
Peer tier avg: 7.23% Industry avg: 5.58%
Pass: < 50% · Fail: > 100% (historical failure threshold)

Texas Ratio of 3.7% is well below the 100% historical failure threshold.

Operating Efficiency FAIL
Efficiency Ratio: 203.55% · 11,355 bps above the 90% BankRegReports fail band
Peer tier avg: 79.57% Industry avg: 56.25%
Pass: ≤ 75% (lower is better) · Fail: ≥ 90%

Efficiency ratio of 203.5% suggests significant cost-to-revenue challenges.

Risk screens

Latest filing (Q2 2026), passing screens included.

Risk screens for Maxwell State Bank
Screen Value Trigger Result
CET1 capital ratio supervisory threshold 22.06% Flags below 7% Within range
Texas ratio BankRegReports band 3.66% Watch at 50%, concern at 100% Within range
Non-performing loan ratio BankRegReports band 1.03% Flags at 3% or above Within range
Uninsured deposit share BankRegReports band — Watch at 50%, concern at 70% Not reported
Loan-to-deposit ratio BankRegReports band 61.67% Flags at 100% or above Within range
Commercial real estate to capital supervisory threshold 0.00% Watch at 200%, concern at 300% Within range
Held-to-maturity unrealized loss to equity BankRegReports band 0.00% Watch at 10%, concern at 25% Within range

Capital ratio: last 12 quarters

CET1 (%)
Quarter CET1 (%)
Q2 2026 22.06%
Q1 2026 17.66%
Q4 2025 20.17%
Q3 2025 25.66%
Q2 2025 18.16%
Q1 2025 18.54%
Q4 2024 12.31%
Q3 2024 12.37%
Q2 2024 10.84%
Q1 2024 11.88%
Q4 2023 11.59%
Q3 2023 12.40%

Texas Ratio: last 12 quarters

Texas Ratio (%)
Quarter Texas Ratio (%)
Q2 2026 3.66%
Q1 2026 5.07%
Q4 2025 1.32%
Q3 2025 0.00%
Q2 2025 1.46%
Q1 2025 1.47%
Q4 2024 2.80%
Q3 2024 0.00%
Q2 2024 0.00%
Q1 2024 0.00%
Q4 2023 0.00%
Q3 2023 0.00%

Maxwell State Bank by quarter

Key safety ratios, last 12 quarters
Quarter end CET1 NPL ratio Texas ratio ROA
Jun 30, 2026 22.06% 1.03% 3.66% -6.54%
Mar 31, 2026 17.66% 1.21% 5.07% -3.21%
Dec 31, 2025 20.17% 0.54% 1.32% -2.48%
Sep 30, 2025 25.66% 0.00% 0.00% -3.18%
Jun 30, 2025 18.16% 0.53% 1.46% -0.84%
Mar 31, 2025 18.54% 0.53% 1.47% -1.05%
Dec 31, 2024 12.31% 0.67% 2.80% -1.28%
Sep 30, 2024 12.37% 0.00% 0.00% -32.75%
Jun 30, 2024 10.84% 0.00% 0.00% -0.92%
Mar 31, 2024 11.88% 0.00% 0.00% -1.29%
Dec 31, 2023 11.59% 0.00% 0.00% -1.55%
Sep 30, 2023 12.40% 0.00% 0.00% -1.39%

Banks with a similar risk profile

4 banks in the same asset tier with the same overall verdict.

Frequently asked

Is Maxwell State Bank FDIC insured?

Yes. Maxwell State Bank is an FDIC-insured commercial bank (FDIC Certificate #15930). FDIC insurance covers $250,000 per depositor, per insured bank, per ownership category.

Is Maxwell State Bank well capitalized?

On its Q2 2026 call report, Maxwell State Bank's CET1 ratio is 22.06%, above the 6.5% well-capitalized threshold. The threshold comes from Prompt Corrective Action, which its primary federal regulator, the FDIC, applies.

What are Maxwell State Bank's key safety ratios?

For Q2 2026, Maxwell State Bank reports CET1 22.06%, leverage 15.45%, Texas ratio 3.66%, noncurrent loans 1.03%. The Texas ratio compares problem assets with tangible equity plus reserves; above 100% has historically signaled elevated failure risk.

What happens to my deposits if Maxwell State Bank fails?

Insured deposits are protected up to $250,000 per depositor, per insured bank, per ownership category. If an insured bank fails, the FDIC pays insured depositors as soon as possible, usually the next business day.

Add this badge to your website

Free to use. It shows Maxwell State Bank’s latest filed figures and updates each quarter.

Maxwell State Bank: regulatory capital profile · BankRegReports

Methodology & disclaimer

Based on the latest FFIEC call report. Model output is an estimate, not a credit rating, and this page is not investment advice. FDIC insurance covers deposits up to $250,000 per depositor per ownership category at any FDIC-insured bank, whatever its safety profile. See the methodology and full profile.