Skip to main content

Bank Safety Analysis

Is First Security Bank - Canby Safe?

First Security Bank - Canby passes all 5 regulatory safety dimensions, with capital, asset quality, and stress buffers above supervisory concern bands. Analysis based on the Q2 2026 call report.

Compared with Q1 2026, CET1 ratio rose 0.60 percentage points in Q2 2026 to 24.90%, the biggest move on this page. Among 161 Minnesota banks, First Security Bank - Canby sits 16th from the top on CET1 ratio, 24.90% as of Q2 2026. The median for banks in the < $100M asset tier is 19.57% on CET1 ratio. First Security Bank - Canby sits 5.34 points higher, at 24.90% (Q2 2026). From Q3 2023 to Q2 2026, First Security Bank - Canby's CET1 ratio ranged between 17.82% (Q1 2024) and 24.90% (Q2 2026) and its Texas ratio ranged between 0.00% (Q2 2025) and 11.50% (Q1 2025). Compared with Q2 2025, First Security Bank - Canby's CET1 ratio from 20.21% to 24.90%, noncurrent loans to total loans from 0.00% to 0.05%, Texas ratio from 0.00% to 0.28%, return on assets from 1.07% to 2.08% in Q2 2026.

Data as of · sourced from FFIEC call reports. How we update

Overall verdict Pass: well above regulatory thresholds
12-month failure risk score
<0.01%
Risk tier
LOW
Composite risk score
0.10/100

A relative risk score, not a calibrated probability: it ranks this bank against every other filer. Model AUC 0.988 (v20261005_114304). Trained on credit-driven community-bank failures, it carries little signal for interest-rate or deposit-flight risk, and its accuracy above roughly $10B in assets is not established, so a low score is not evidence of safety. See the methodology. This is not investment advice or a credit rating.

Scorecard by dimension

Peer cohort: banks with under $100M in assets (536 banks) · Industry averages as of Q2 2026.

Capital Adequacy PASS
CET1 Ratio: 24.90% · 1,790 bps above the 7.0% well-capitalized-plus-buffer line
Peer tier avg: 24.84% Industry avg: 14.72%
Pass: ≥ 7.0% (well-capitalized plus buffer) · Fail: < 4.5% (below minimum)

CET1 of 24.90% sits comfortably above the 6.5% well-capitalized threshold under Prompt Corrective Action and the 7.0% level required once the capital conservation buffer is included.

Leverage PASS
Tier 1 Leverage Ratio: 14.06% · 906 bps above the 5.0% well-capitalized line
Peer tier avg: 14.21% Industry avg: 9.01%
Pass: ≥ 5.0% (well-capitalized) · Fail: < 4.0% (below minimum)

Tier 1 leverage of 14.06% is above the 5% well-capitalized threshold.

Asset Quality PASS
Nonperforming Loans (NPL) Ratio: 0.05% · 145 bps below the 1.5% supervisory watch band
Peer tier avg: 1.40% Industry avg: 1.02%
Pass: < 1.5% · Fail: > 3.0%

Nonperforming loans at 0.05% are within industry-normal range.

Stress Buffer PASS
Texas Ratio: 0.28% · 4,972 bps below the 50% supervisory watch band
Peer tier avg: 8.94% Industry avg: 7.23%
Pass: < 50% · Fail: > 100% (historical failure threshold)

Texas Ratio of 0.3% is well below the 100% historical failure threshold.

Operating Efficiency PASS
Efficiency Ratio: 48.76% · 2,624 bps below the 75% supervisory concern band
Peer tier avg: 75.77% Industry avg: 56.25%
Pass: < 65% (lower is better) · Fail: > 75%

Efficiency ratio of 48.8% reflects competitive operating costs (lower is better).

Risk screens

Latest filing (Q2 2026), passing screens included.

Risk screens for First Security Bank - Canby
Screen Value Trigger Result
CET1 capital ratio supervisory threshold 24.90% Flags below 7% Within range
Texas ratio BankRegReports band 0.28% Watch at 50%, concern at 100% Within range
Non-performing loan ratio BankRegReports band 0.05% Flags at 3% or above Within range
Uninsured deposit share BankRegReports band — Watch at 50%, concern at 70% Not reported
Loan-to-deposit ratio BankRegReports band 52.42% Flags at 100% or above Within range
Commercial real estate to capital supervisory threshold 35.65% Watch at 200%, concern at 300% Within range
Held-to-maturity unrealized loss to equity BankRegReports band 0.00% Watch at 10%, concern at 25% Within range

Capital ratio: last 12 quarters

CET1 (%)
Quarter CET1 (%)
Q2 2026 24.90%
Q1 2026 24.30%
Q4 2025 22.52%
Q3 2025 21.10%
Q2 2025 20.21%
Q1 2025 18.57%
Q4 2024 20.58%
Q3 2024 18.45%
Q2 2024 18.41%
Q1 2024 17.82%
Q4 2023 19.72%
Q3 2023 18.74%

Texas Ratio: last 12 quarters

Texas Ratio (%)
Quarter Texas Ratio (%)
Q2 2026 0.28%
Q1 2026 0.18%
Q4 2025 0.18%
Q3 2025 3.04%
Q2 2025 0.00%
Q1 2025 11.50%
Q4 2024 1.20%
Q3 2024 1.33%
Q2 2024 1.84%
Q1 2024 0.00%
Q4 2023 0.03%
Q3 2023 0.30%

First Security Bank - Canby by quarter

Key safety ratios, last 12 quarters
Quarter end CET1 Noncurrent loans Texas ratio ROA
Jun 30, 2026 24.90% 0.05% 0.28% 2.08%
Mar 31, 2026 24.30% 0.05% 0.18% 2.10%
Dec 31, 2025 22.52% 0.05% 0.18% 1.59%
Sep 30, 2025 21.10% 0.00% 3.04% 3.17%
Jun 30, 2025 20.21% 0.00% 0.00% 1.07%
Mar 31, 2025 18.57% 0.13% 11.50% 1.47%
Dec 31, 2024 20.58% 0.29% 1.20% 1.30%
Sep 30, 2024 18.45% 0.31% 1.33% 2.17%
Jun 30, 2024 18.41% 0.00% 1.84% 1.92%
Mar 31, 2024 17.82% 0.00% 0.00% 1.84%
Dec 31, 2023 19.72% 0.01% 0.03% 1.37%
Sep 30, 2023 18.74% 0.06% 0.30% 1.56%

Banks with a similar risk profile

4 banks in the same asset tier with the same overall verdict.

Frequently asked

Is First Security Bank - Canby FDIC insured?

Yes. First Security Bank - Canby is an FDIC-insured commercial bank (FDIC Certificate #5107). Customer deposits are protected up to the standard FDIC insurance limit of $250,000 per depositor, per ownership category.

Is First Security Bank - Canby well capitalized?

Yes. First Security Bank - Canby reports a CET1 Ratio of 24.90%, comfortably above the regulatory well-capitalized threshold that its primary federal regulator, the FDIC, applies under Prompt Corrective Action.

What is First Security Bank - Canby's nonperforming loan ratio?

As of the most recent call report, First Security Bank - Canby's nonperforming loan ratio is 0.05%. Nonperforming loans at 0.05% are within industry-normal range.

What is First Security Bank - Canby's Texas Ratio?

First Security Bank - Canby's Texas Ratio is 0.28%. It compares nonperforming assets with tangible equity plus reserves; above 100% has historically signaled elevated failure risk.

How safe is my money at any FDIC-insured bank?

FDIC insurance covers up to $250,000 per depositor, per insured bank, per ownership category. If an insured bank fails, the FDIC typically pays insured depositors within one business day.

Add this badge to your website

Free to use. The badge always shows First Security Bank - Canby’s most recent filed regulatory figures. It updates automatically each quarter, so it never goes stale.

First Security Bank - Canby: regulatory capital profile · BankRegReports

Methodology & disclaimer

Based on the latest FFIEC call report. Model output is an estimate, not a credit rating, and this page is not investment advice. FDIC insurance covers deposits up to $250,000 per depositor per ownership category at any FDIC-insured bank, whatever its safety profile. See the methodology and full profile.